manualshive.com logo in svg

SATO TH2 Series, Operator'S Manual

Share
Download
SATO TH2 Series Operator'S Manual Download Page 24

Section 2: Installation

Page 2-10

TH2 Series Operator Manual

2.4 CONNECTIONS (cont’d)

2.4.6 Charging the optional battery pack with the optional battery charger 

1.

Connect the DC power plug of the AC adapter to the 
charger unit. Then, connect the AC power cable to the 
AC adapter and plug the other end of the cable to the AC 
outlet. 

2.

Insert the battery pack into the slot, with the terminal 
pointing downward. 
When charging begins, the 

CHARGE

 lamp (red) lights. 

When charging is complete, the 

CHARGE

 lamp lights 

green (fully charged).

3.

Remove the battery pack when charging is complete. 

Notes:

• When the 

CHARGE

 lamp is not lit, check that the battery 

pack is installed securely.
The battery may not be charged when not securely 
installed.

• When a charged battery pack is installed, the 

CHARGE

 

lamp first lights red, then lights green.

Caution

The optional battery pack and battery charger purchased for this printer are specific to this printer only. 
Do not use them for other electrical devices.

Charging time

It takes about 1.5 hours for the 

CHARGE

 lamp to turn 

green when charging a completely depleted battery.

Summary of Contents for TH2 Series

































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands