Section 3: Configuration and Operation
TH2 Series Operator Manual
Page 3-51
3.7 PRINTER SETUP MENU (Cont’d)
Menu
Description
The
PITCH
enables fine tuning of the formats vertical position on the media.
The value can be expressed in inches, millimeters or dots depending on selec-
tion in
UNIT
menu.
Displays the Pitch range and input field with existing Pitch value and its unit.
Enables input of new Pitch value.
Setting range is between
0
and
80
, and the default value is
0 dot
.
Note:
If the value is outside the allowed range,
Invalid
will be displayed.
If the value is acceptable,
Saved
will be displayed when
enter button is
pressed.
The
OFFSET
enables fine tuning of the pre-defined media stop positions.
The value can be expressed in inches, millimeters or dots depending on selec-
tion in
UNIT
menu.
Displays the Offset range and input field with existing Offset value and its unit.
Enables input of new Offset value.
Setting range is between
-24
and
24
, and the default value is
0 dot
.
Notes:
• If the value is outside the allowed range,
Invalid
will be displayed.
• When adjusting the Offset value, the first following format will be printed on a
faulty position since a “new” print position is printed on an “old” stop position.
Next prints will be correct.
If the value is acceptable,
Saved
will be displayed when
enter button is
pressed.
IMAGE
menu.
IMAGE
handles the formats positioning and appearance on the media.
Enables the selection of
1.Offset
,
2.Rotation
or
3.Mirror
.
OFFSET
menu.
OFFSET
enables fine tuning of formats.on the media.
Enables the selection of
1.Vertica
or
2.Horizontal
.