45
Figure 6-30 Analog Output Type Selection
The parameter is to select the output type, i.e. voltage or current,
CN6 jumper is for AO, “I” represents current, “V” represents voltage.
F6.08 AO output gain
Range
：
0.0
～
200.0
％【
100.0
％】
F6.09~F6.10 Reserved
Reserved
F6.11 Preset counting value
Range
：
F6.12
～
65535
【
0
】
F6.12 Specified counting value
Range
：
0
～
F6.11
【
0
】
Frequency inverter through the number 43 function “counter trigger
signal input (X terminal)
”
to count.
Set count value: when the count value reach to set value, Y terminals
output a indicator, counter stop counting;
Specified count value: when the count value reaches the specified count
value, Y terminal output indicator, until set count reached;Among them,
the current count value F9.35 can be modified.
F6.13 Freq. arrival detection
range (FAR)
Range
：
0.00
～
650.00Hz
【
2.50Hz
】
Set this function is used to test the current output frequency and
frequency deviation, the output terminal function set to 1 (the signal
frequency reaches FAR), when the output frequency of frequency
