English Englis_
English
_51
DEVICE MANAGEMENT
For the master card in general, various authorization methods for regular cards are not supported (depending on devices).
For entering the master mode, SSA-S30xx series products use RF+PFingerprint authorization. For SSA-R20x0,
R20x1 series products, reading the Master Card enters the master mode.
Click [Capture] button. When the button is pressed, the red indicator of the fi ngerprint scanner turns on. Place
the fi nger on the scanner to register the fi rst fi ngerprint template. Once the red indicator turns off, release your
fi nger and then put the same fi nger onto the fi ngerprint scanner again when the light turns on. As shown in the
fi gure, the registered fi ngerprint is scanned properly if the fi ngerprint is clear and marked with stars more than 3.
Once completed with the fi rst fi ngerprint scanning, release your fi nger from the scanner and wait until the red
indicator turns on before the second fi ngerprint scanning. If the scanned fi ngerprint is marked with 1 or 2 stars, try
again or use another fi nger.
Click [Apply].
Check [Use Biometric Information] to apply the scanned fi ngerprint in [Fingerprint Management].
You don’t need to check it if no fi ngerprint is used for the Master Card.
Click Save <
> in the tool bar.
Move to the [Device List] tab.
8.
J
9.
10.
11.
12.
Summary of Contents for TECHWIN SAMS Pro
Page 1: ...SAMS Pro SAMS Pro Lite User Manual SSA M2000 SSA M2100 ...
Page 200: ...MEMO ...
