Samsung TECHWIN SAMS Pro User Manual Download Page 140

Page: 140 / 202

140_

Card Design

Add Card Design – Print Button

Screen descriptions

Click the Print button to promptly print the card design shown in the Add Card Design window.

How to use

Step 1) Click Print [

] button.

Step 2) If the card design has been modiﬁ ed or a new card design (never saved) will prompt you with a

message box shown below.

Step 3) Click [Yes]. (Will not appear for saved card designs.)

Step 4) [Print Employee Card] screen appears. (Refer to [Print Employee Card] part of the manual.)

PRINT EMPLOYEE CARD

In this part of the user manual, we provide an overview of [Print Employee Card] so that you can print out the card design
that you have added in [Add Card Design].

Perform readability test by printing the design on a regular paper before printing on the actual card if the design includes barcode.

If you set the card design to Label Paper, it is recommended to print it in ordinary paper and check the print layout beforehand.



Summary of Contents for TECHWIN SAMS Pro











































































































































































































Search results

Summary of Contents for TECHWIN SAMS Pro

Reviews:

Related manuals for TECHWIN SAMS Pro

Brands by name

Popular brands

Samsung TECHWIN SAMS Pro, User Manual

Search results

Summary of Contents for TECHWIN SAMS Pro

Reviews:

Related manuals for TECHWIN SAMS Pro

Brands by name

Popular brands