Samsung TECHWIN SAMS Pro User Manual Download Page 114

Page: 114 / 202

114_

lift

Lift

From the upper tool bar, select [View Report]<

>. If matches are found, the search results will be displayed as follows.

If you want to print out a report, click [Print] in the [Preview Report] tool bar to print out the report.

If you export the report in a different ﬁ le format, click [Conversion] in the [Preview Report] tool bar to export the report in a

desired ﬁ le format.

Search criteria

- Lift Name: One of search criteria. If you select this for the search criteria, press the button to display a list of lifts where

you can select lifts that you want to check.

- Sort Type: Specify the display sequence of the report contents. Select either Lift or Building.

- Sort Order: Select either ascending order or descending order.

- Conversion: If you want to export the report in formats of TEXT, PDF or TIF, click [Conversion] in the preview tool bar.

Note that saving as a PDF may not produce proper formatting if used font cannot be found
from the computer. Change the font used on such occasions.

How to change font

From the top menu, click [Tools] > [Options].

On the left menu of options, click Font in the [View] menu.

Select a desired font for [Report Font], and click [Apply] button.

Summary of Contents for TECHWIN SAMS Pro











































































































































































































Search results

Summary of Contents for TECHWIN SAMS Pro

Reviews:

Related manuals for TECHWIN SAMS Pro

Brands by name

Popular brands

Samsung TECHWIN SAMS Pro, User Manual

Search results

Summary of Contents for TECHWIN SAMS Pro

Reviews:

Related manuals for TECHWIN SAMS Pro

Brands by name

Popular brands