English Englis_
English
_21
SYSTEM MANAGEMENT
This is a step to confi gure the device settings. Scan for controllers to communicate with via the previously
specifi ed loop and select one to register. Specify the address range for the controllers to scan for. By default,
the automatic scan will check the address range of between 0 and 1. Click [Auto Search Controller] to scan for
controllers within the specifi ed range. The controllers found will be displayed in the [Searched Controller List].
The controllers found will be displayed in the [Searched Controller List]. Select a controller to use in the
controller list and drag and drop it to the [Registered Controller List] on the bottom. Or use the triangle or the
inverted triangle shaped button to register or delete it. Select the name column of each controller in the
[Registered Controller List] and rename it as necessary. Click [Next] to move to the next step.
Confi rm the registered information. Check whether the controller setting is properly done, and click [Save] to
fi nish the setting.
Device Setting Wizard – Loop Setting (Network Communication)
4.
5.
Summary of Contents for TECHWIN SAMS Pro
Page 1: ...SAMS Pro SAMS Pro Lite User Manual SSA M2000 SSA M2100 ...
Page 200: ...MEMO ...
