38_
System Management
System Management
Select the [Time Schedule]. This fi eld is an optional item, set this if required. Set the time schedule for each
input, if its function is linked to a time schedule. You can set the input to operate only for the time specifi ed in
the time schedule.
Select a [Building-Floor].
Select whether to use the Graphic Map in [Use Graphic Map]. This fi eld is an optional item, set this if required.
Use this when you assign icons for inputs on a graphic map.
Select an [Icon]. This fi eld is an optional item, set this if required. Sets the icon for the input.
Move to the [Output Time Setting] tab.
You can set output signal’s duration for each input point. For example, pressing the exit button requires
signaling the door contact of the corresponding door to open it. In general, Output 1 is set to 03 seconds of
activation when the exit button is pressed.
Select an input point to be edited from the [Select Input] list, and confi gure the output time settings.
Click Save <
> in the tool bar.
Click Transmit button <
> in the toolbar to send the confi guration to the device.
8.
9.
10.
11.
12.
13.
14.
15.
16.
Summary of Contents for TECHWIN SAMS Pro
Page 1: ...SAMS Pro SAMS Pro Lite User Manual SSA M2000 SSA M2100 ...
Page 200: ...MEMO ...
