Samsung TECHWIN SAMS Pro User Manual Download Page 131

Page: 131 / 202

English Englis_

English

_131

CARD DESIGN

Group

Name

Property Name

Description

Setup

Guide

line /

Grid

Guide line

Used to display/hide the guide lines.

(Guide lines displayed are will not be printed.)

Select the guide line radio button.
(Default: Not used)

Grid

Used to display/hide the grid lines.

Select the grid line radio button. (Default: Use)

Unit

Sets the distance between lines for guide and grid lines.

Select the base unit.

(Unit: Pixel, Inch, Cm)

Unit Conversion

Shows unit conversion reference for the card design.

Unit is the base unit used for the card
design.

Working

Space

Selects the

working space.

Selects the working space displayed on the screen.

1. To display front side working space only,

select its radio button.

2. To display rear side working space only,

select the Rear radio button. (This radio
button is active if selecting double-sided
working space.)

3. To display both front and rear work

spaces, select the Double-Sided radio
button. (This radio button is active if
selecting double-sided working space.)

Supported plastic cards and label papers.

Summary of Contents for TECHWIN SAMS Pro











































































































































































































Search results

Summary of Contents for TECHWIN SAMS Pro

Reviews:

Related manuals for TECHWIN SAMS Pro

Brands by name

Popular brands

Samsung TECHWIN SAMS Pro, User Manual

Search results

Summary of Contents for TECHWIN SAMS Pro

Reviews:

Related manuals for TECHWIN SAMS Pro

Brands by name

Popular brands