Samsung SCX-6320F, Service Manual

Page: 85 / 208

Alignment & Adjustments
Service Manual
6-15
Samsung Electronics
6.4.1.3 Operation of Tech mode
Function
--
1’st LCD
2’st LCD
3’st LCD
4’st LCD
5’st LCD
6’st LCD
Default
Tech Mode
1
Data Setup
[Send Level]
Send Level
[-9~-15]
-12
Data Setup
[Modem Speed]
Modem Speed
[33.6,28.8,14.4,12,96, 48]
33.6
[Dial Mode]
Dial Mode
[Tone, Pulse]
[Error Rate]
Error Rate
[5%, 10%]
10%
[Notify Toner]
Notify Toner
[Customer No.] [Customer Name] [Service Number] [Serial Number]
[Clear All Mem.]
Clear All Mem.
[Clear Count]
Clear Count
[Total Page Count] [CRU Print CNT] [FLT Scan Count] [ADF Scan Count] [Used Toner CNT]
[Flash Upgrade]
Flash Upgrade
[Local] [Remote]
2
Machine Test
[Switch Test] [Modem Test] [DRAM Test] [ROM Test] [Pattern Test] [Shading Test]
3
Engine Test
[Diagnostic]
Engine Test
NO > 0 - 6
ALL MOTOR TEST
1:ON 2:OFF
FCF SOLENOID TEST
1:ON 2:OFF
M F SOLENOID TEST
1:ON 2:OFF
PTL TEST
1:ON 2:OFF
FAN TEST
1:ON 2:OFF
FUSER CONTROL TEST
1:ON 2:OFF
FUSER TEMP TEST
1:CHECK 2:NEXT
LSU MOTOR TEST
1:ON 2:OFF
LASER DIODE TEST
1:ON 2:OFF
LSU READY TEST
1:CHECK 2:NEXT
LSU HSYNC TEST
1:CHECK 2:NEXT
SENSOR TEST
1:CHECK 2:NEXT
SCF MOTOR TEST
1:ON 2:OFF
SCF SOLENOID TEST
1:ON 2:OFF
SCF EMP/INST TEST
1:CHECK 2:NEXT
OPC FUSE STATE
1:CHECK 2:NEXT
OPC FUSE CHECK
1:CHECK 2:NEXT
TONER STATE
1:CHECK 2:NEXT
TONER LOW CHECK
1:CHECK 2:NEXT
PAGE COUNTER INC
1:CHECK 2:NEXT
AIR TEMP CHECK
1:CHECK 2:NEXT
MHV SUPPLY 1350V
1:ON 2:OFF
MHV ADC READ
1:CHECK 2:NEXT
DEV SUPPLY 450V
1:ON 2:OFF
THV SUPPLY NEG VOLT
1:ON 2:OFF
THV SUPPLY 1301V
1:ON 2:OFF
THV ADC READ
1:CHECK 2:NEXT
TEST START
NEXT : RIGHT KEY
[Status Print]
4
DADF Test
5
Report
[Protocol] [System Data]