Media and tray
_ 50
Glossy
Load one paper to the multi-purpose tray at a time, glossy side facing
up.
•
Recommended media: Glossy paper (Letter) for this machine by HP
Brochure Paper (Product: Q6611A) only.
•
Recommended media: Glossy paper (A4) for this machine by HP
Superior Paper 160 glossy (Product: Q6616A).
SETTING THE PAPER SIZE AND TYPE
After loading paper in the paper tray, set the paper size and type using the
control panel. These settings will apply to copy and fax modes. For
computer printing, select the paper size and type in the application program
you use on your computer. (See "Paper tab" on page 6.)
The settings made from the machine driver override the settings on
the control panel.
1.
Press
Machine Setup
on the control panel.
2.
Press
Admin Setting
.
3.
When the login message appears, enter password with number keypad
and press
OK
. (See "Setting the authentication password" on page 1.)
4.
Press the
General
tab.
5.
Press the down arrow to switch the screen, press
Tray Management
.
6.
Select tray and its options such as paper size and type.
7.
Press
OK
.
If you want to use special-sized paper-such as a billing paper, select
Custom
in the
Paper
tab in the
Printing Preferences
. (See "Paper
tab" on page 6.)
USING THE OUTPUT SUPPORT
The surface of the output tray may become hot if you print a large
number of pages at once. Make sure that you do not touch the
surface, and do not allow children near it.
The printed pages stack on the output support, and the output support will
help the printed pages to align. Pull out the output support and expand it.
If paper coming out of the output try has problems, such as excessive
curl, try printing to the rear cover. The rear cover can only hold one
piece of paper at a time, do not let the papers stack on the rear cover.
