Samsung SCX-5835 Series User Manual Download

Page: 123 / 147

Troubleshooting

_ 9

Printing problems

The paper keeps
jamming.

•

There is too much paper in the tray. Remove

excess paper from the tray. If you are printing

on special materials, use the multi-purpose

tray.

•

An incorrect type of paper is being used. Use

only paper that meets the specifications

required by the machine. (See "Print media

specifications" on page 5.)

•

There may be debris inside the machine.

Open the front cover and remove any debris.

•

If an original does not feed into the machine,

the document feeder rubber pad may need to

be replaced. Contact a service representative.

Transparencies stick
together in the paper
exit.

Use only transparencies specifically designed

for laser printers. Remove each transparency as

it exits from the machine.

Envelopes skew or
fail to feed correctly.

Ensure that the paper guides are against both

sides of the envelopes.

CONDITION

SUGGESTED SOLUTIONS

CONDITION

POSSIBLE

CAUSE

SUGGESTED

SOLUTIONS

The machine
does not print.

The machine is not

receiving power.

Check the power cord

connections. Check the

power switch and the power

source.

The machine is not

selected as the

default machine.

Select your machine as your

default machine in your

Windows.

Check the machine for the following:

•

The front cover is not closed. Close the front

cover.

•

Paper is jammed. Clear the paper jam. (See

"Clearing paper jams" on page 3.)

•

No paper is loaded. Load paper. (See "Loading

paper in the tray" on page 3.)

•

The toner cartridge is not installed. Install the

toner cartridge.

If a system error occurs, contact your service

representative.

The connection

cable between the

computer and the

machine is not

connected properly.

Disconnect the machine

cable and reconnect it.

The connection

cable between the

computer and the

machine is

defective.

If possible, attach the cable

to another computer that is

working properly and print a

job. You can also try using a

different machine cable.

The port setting is

incorrect.

Check the Windows printer

setting to make sure that the

print job is sent to the correct

port. If the computer has

more than one port, make

sure that the machine is

attached to the correct one.

The machine may

be configured

incorrectly.

Check the

Printing

Preferences

to ensure that

all of the print settings are

correct. (See "Opening

Printing Preferences" on

page 5.)

The printer driver

may be incorrectly

installed.

Repair the machine

software. (See "Installing

USB connected machine’s

driver" on page 3, "Installing

network connected

machine’s driver" on

page 2.)

The machine is

malfunctioning.

Check the display message

on the control panel to see if

the machine is indicating a

system error. Contact a

service representative.

Summary of Contents for SCX-5835 Series




















































































































































Search results

Summary of Contents for SCX-5835 Series

Reviews:

Related manuals for SCX-5835 Series

Brands by name

Popular brands

Samsung SCX-5835 Series, User Manual

Search results

Summary of Contents for SCX-5835 Series

Reviews:

Related manuals for SCX-5835 Series

Brands by name

Popular brands