Call Functions 28
Options During a Call
Your phone provides a number of control functions that you can
use during a call.
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume, use the
Volume keys on the left side of the phone.
Press the
key to increase the volume level and the
key to
decrease the level.
In Idle mode, you can also adjust the ringer volume using these
same keys.
Putting a Call on Hold
You can place the current call on hold whenever you want. You
can also make another call while you have a call in progress if
your network supports this service.
To put a call on hold:
1.
While on a call, press the
Options
soft key.
2.
Highlight
Hold
and press the
key. The call is on hold.
3.
You can reactivate the call whenever you want, by pressing
the
Resume
soft key.
To make a call while you have a call in progress:
1.
Place the current call on hold using the previous
procedure.
2.
Enter the new phone number that you wish to dial or look it
up in the Address Book.
3.
Press the
key to dial the second call. Once
connected, both calls display on the screen.
When you have an active call and a call on hold, you may switch
between the two calls, changing the one on hold to active and
placing the other on hold.
To switch between the two calls:
1.
Press the
Options
soft key.
2.
Highlight
Swap
and press the
Select
soft key. The current
call (#2) is placed on hold and the previous call on hold
(#1) is reactivated so that you can continue conversing
with that person.
3.
Press the
key to end the currently selected call.
To end a call:
1.
Press the
Options
soft key.
2.
Highlight
End
and press the
Select
soft key.
3.
Highlight the call you wish to end (Active Call, Held Call, or
All Calls) and press the
Select
soft key.
