Starting & Driving
Cruise Control System
O
FF
SET
O
N
R
E
S
U
M
E
C
A
N
C
E
L
• Acceleration (1)
• Deceleration (2)
• Cancel (3)
• ON (4)
• Resume (5)
• Set (6)
• OFF (7)
The cruise control system enables the driver to keep the
vehicle advancing at a constant speed without depressing
the accelerator pedal.
This is particularly useful for
motorway cruising, or for any journey where a constant
speed can be maintained for a lengthy period.
Cruise Control System Activation
Cruise control system is operated with a lever located at
the left side of the steering wheel underneath the lighting
stalk switch.
1 With the ignition switch in position ON/RUN, if the
cruise lever switch is in 'OFF' position (7), then the
cruise control is in OFF state. If the cruise lever
switch is in 'ON' position (4), then the system is
in Standby state. Switch the cruise lever to "ON"
position (4), the yellow cruise indicator
on the
instrument lights on, and the cruise control system
is in Standby state.
2 When the cruise control system is in Standby state,
and the current speed exceeds 40km/h (the operating
speed range of cruise control system is 40
～
200km/h), press down "Set" button (6) at the end of
cruise lever, the yellow indicator on the instrument
shall be changed to green, and the cruise control
system enters into activation state. The target speed
218
Summary of Contents for MG HS
Page 88: ......
Page 166: ...Seats Restraints normally for those about 7 years old or those older than 7 years old 152...
Page 269: ...Emergency Information Code Specs Function F53 F54 255 5...
Page 272: ......
