Maintenance
Replacing Front Windscreen Wiper Blades
1 With the bonnet in closed state, and the ignition
switch in OFF position for up to 20 seconds, press
down the wiper stalk switch to Single Wipe position
(see ‘Wipers and Washers' in the ‘Instruments
and Controls’ chapter) and release, the wiper will
automatically move to service position, and stop on
the windscreen.
2 Lift the wiper arm away from the windscreen.
3 Press the button on the wiper arm (as illustrated),
and pull the upper end of the wiper blade outward to
disengage from the wiper arm.
4 Unhook the blade from the wiper arm and discard.
5 Locate the new wiper into the slot of the wiper arm.
6 Push the wiper blade towards the arm until the wiper
blade is engaged.
7 Check whether the wiper blade is fitted correctly to
the arm before positioning on the windscreen.
8 Press down the wiper stalk switch again to Single
Wipe position and release, or turn on the ignition
switch, the wiper will exit the service mode and
automatically return to its original position.
280
Summary of Contents for MG HS
Page 88: ......
Page 166: ...Seats Restraints normally for those about 7 years old or those older than 7 years old 152...
Page 269: ...Emergency Information Code Specs Function F53 F54 255 5...
Page 272: ......
