Starting & Driving
Use of non recommended materials or
paint on rear bumper repairs may have a
detrimental effect on the operation of the
rear sensors. Please only use recommended
materials.
The rear driver assistance system includes blind spot
detection (BSD), lane change assist (LCA), rear cross
traffic alert (RCTA) and door open warning (DOW)
functions.
The rear driver assistance modules are mounted at the
rear of the vehicle on each side, they can assist in detecting
vehicles behind or to the side of your vehicle.
The warning lamps to support this system are located
within the LH and RH door quarter windows, they will
illuminate or flash to warn of an approaching object or car
to assist you in manoeuvring the car safely.
Note: The radar requires calibration on new vehicles
or for vehicles of where a rear detecting radar
sensor has been replaced. The rear detection radar
sensors possess an automatic calibration function to
compensate for installation error within a certain
range.
When the vehicle is running, the radar will
automatically enter the calibration state. During the
calibration process, the system will provide limited
functions, and the alarm may be inaccurate. Upon
completion of the calibration, the system will resume
all functions.
224
Summary of Contents for MG HS
Page 88: ......
Page 166: ...Seats Restraints normally for those about 7 years old or those older than 7 years old 152...
Page 269: ...Emergency Information Code Specs Function F53 F54 255 5...
Page 272: ......
