Instruments and Controls
If this lamp flashes first and then remains illuminated after
a period of time, it indicates the system has a failure.
Please contact a local MG Authorised Repairer as soon as
possible.
ABS Malfunction Warning Lamp - Yellow
A B S
This lamp illuminates to indicate an ABS fault.
Please contact an MG Authorised Repairer as soon as
possible.
If an ABS failure occurs while driving, ABS will function
abnormally, but normal braking will still be available.
Please contact a local MG Authorised Repairer as soon as
possible.
Hill Descent Control (HDC) ON/Malfunction
Warning - Green/Yellow
With HDC switch pressed, if the lamp
illuminates green, it indicates the HDC system enters into
Standby mode. When the lamp flashes green, it indicates
that the system is currently under the control of HDC.
Press the HDC switch again, the lamp extinguishes, it
indicates the HDC function is deactivated.
If HDC related system has a failure, this lamp illuminates
yellow. Please contact an MG Authorised Repairer as soon
as possible.
If this lamp illuminates yellow and flashes, it indicates that
the brake system is too hot and HDC system is disabled.
Stability Control/Traction Control System
Warning Lamp - Yellow
This lamp illuminates to indicate that there is
a failure in the system. Please contact an MG Authorised
Repairer immediately.
If this lamp flashes during driving, it indicates the system is
operating to assist the driver.
32
Summary of Contents for MG HS
Page 88: ......
Page 166: ...Seats Restraints normally for those about 7 years old or those older than 7 years old 152...
Page 269: ...Emergency Information Code Specs Function F53 F54 255 5...
Page 272: ......
