SAIC MOTOR MG HS, Manual

Page: 76 / 319

Instruments and Controls
close. You can stop the movement of the sunshade at any
time by releasing the switch. Push the sunshade switch
forward with excessive force to the 2nd position (2) and
then release, the sunshade will automatically close to the
end. You can stop the movement of the sunshade at any
time by pushing the switch forward again.
Note: If you park the vehicle for a long period of time,
it is recommended to close the sunshade; if possible,
park the vehicle into garage to prevent the in-car
temperature from rising due to long-time exposure,
without damaging the interiors.
Anti-pinch Function
When being automatically closed, if the resistance for
closing sunroof glass increases due to obstacles, extreme
weather (e.g. lower than -20
℃ ) or other reasons, the
sunroof glass and sunshade will stop movement and
automatically open to reduce the impact to the obstacle
and protect the movement mechanism of sunroof. In case
of low battery, the anti-pinch function is ineffective.
Forcibly Close the Sunroof Glass
To forcibly close the sunroof glass reopened due to
activation of anti-pinch function in a particular case: slide
the glass switch forward to the 1st position within 5
seconds and hold it until the sunroof glass is fully closed.
Please note that the sunroof glass is without anti-pinch
function during close.
Forcibly Close the Sunshade
To forcibly close the sunshade reopened due to activation
of anti-pinch function in a particular case:
slide the
sunshade switch forward to the 1st position within 5
seconds and hold it until the sunshade is fully closed. Please
note that the sunshade is without anti-pinch function
during close.
Linkage between Sunshade and Sunroof Glass
To prevent the sunshade from being exposed, the sunshade
will move together when the sunroof glass is opened. To
close the sunshade, please close the sunroof glass first.
62