SAIC MOTOR MG HS, Manual

Page: 141 / 319

Seats & Restraints
IMPORTANT
• Always ensure the seat belt will not become trapped
in the door aperture when closing the door, damage
will occur.
• Pulling the seat belt out too quickly may cause it to
'lock'. In this case, allow the seat belt to retract
slightly and then pull it across your body slowly.
• If it is difficult to pull the seat belt out, it may be due
to twisted webbing. If this is the case, fully extract
the seat belt, remove the twist, allow the seat belt
to retract slowly.
• When using the rear seat belts please ensure they
are fully retracted into the correct position to avoid
jamming in the rear seat catches. Even if the seat
belt is not completely smoothed, it is still required
to be worn during driving, but the twisted part of the
seat belt shall not contact the passenger. When this
happens, please go to an MG Authorised Repairer
for repair.
Correct Routing of the Seat Belts
Ensure the seat belt is correctly positioned on
the body, NEVER cross the neck or abdomen,
NEVER pass the seat belt behind the back or
under the arms.
When wearing seat belts, the lap belt section should be
positioned as low as possible across your hips. Never cross
the abdomen. In the event of a collision, the lap belt can
apply a force on the hips and reduce the possibility of you
127
3