SAIC MOTOR MG HS, Manual, Page: 77 / 319

Instruments and Controls
Initialization of Sunroof
Sunroof operation will be influenced by power failure when
sunroof glass or sunshade is in motion, and it is necessary
to initialize after power on.
Glass initialization: close the glass, slide the sunroof glass
switch forward to the 2nd position and hold for 10 seconds,
the glass will automatically slide open for a distance during
which the switch shall keep sliding to the 2nd position and
then close automatically.
Sunshade initialization: close the sunshade, slide the
sunshade glass switch forward to the 2nd position and
hold for 10 seconds, the sunshade will automatically slide
open for a distance during which the switch shall keep
sliding to the 2nd position and then close automatically.
Thermal Protection
To prevent the sunroof glass motor and the sunshade
motor from being overheated and damaged, the motors
are designed with thermal protection function, and any
opening or closing operation under the thermal protection
state will not move the sunroof. After the motor is cooled
down and exits the thermal protection state, the sunroof
can be operated till the next thermal protection functions.
"Lazy Lock" Function
"Lazy Lock" function can open or close the sunroof from
outside.
Press the remote key unlock button for several seconds till
the sunroof glass and sunshade start opening, then release
the switch to fully open the sunroof; press the remote key
lock button for several seconds till the sunroof glass and
sunshade start closing, then release the switch to fully close
the sunroof.
63
1