Starting & Driving
System Functions
Blind Spot Detection (BSD)
When the vehicle is driving forward, the system will
monitor the motor vehicles located in the blind zones of
the left and right exterior mirrors. When the conditions
for activating the blind spot detection function are met,
the warning lamps on the corresponding side will remain
on. In this case, turn on the turn signal lamp and the
relevant warning lamp will flash to remind the driver to
avoid collision.
The conditions for activating the blind spot detection
function include:
1 Rear driver assistance system is in normal state,
without failure alarm.
2 Blind spot detection (BSD) function is enabled.
3 The vehicle speed is above 30km/h.
4 There are motor vehicles in the blind zone of the
vehicle. The left and right areas, which are 2m ahead
226
Summary of Contents for MG HS
Page 88: ......
Page 166: ...Seats Restraints normally for those about 7 years old or those older than 7 years old 152...
Page 269: ...Emergency Information Code Specs Function F53 F54 255 5...
Page 272: ......
