Starting & Driving
released, it will resume a suitable higher gear (based on the
vehicle speed and the position of the accelerator pedal).
Vehicle Start-off
The vehicle can only be started with the brake pedal
pressed and P or N selected;
after selecting the
desired gear, and waiting for the full engagement of the
transmission, release the brake pedal, the vehicle will
automatically start off at a slow speed.
Driving on Hills
In cases where a short stop on a hill is
required, such as a traffic jam, DO NOT
momentarily
apply
the
accelerator
to
prevent “roll back”.
This could cause
the transmission to overheat and result in
damage.
Hill Start
The hill hold control function can be used for hill start. For
details on hill hold control system, please refer to "Foot
Brake" in "Brake System" chapter.
Note: The aid of these functions cannot defy the
laws of physics. DO NOT drive the vehicle beyond its
physical limitations, loss of control will still occur.
Downhill Driving
Repeatedly pressing the brake pedal may
result in foot brake overheat, thereby causing
the degradation of brake performance or
even brake failure.
184
Summary of Contents for MG HS
Page 88: ......
Page 166: ...Seats Restraints normally for those about 7 years old or those older than 7 years old 152...
Page 269: ...Emergency Information Code Specs Function F53 F54 255 5...
Page 272: ......
