Emergency Information
Your car is equipped with 2 towing eyes (located at the
front and the rear of the vehicle), which are used for
fitting the towing hook in the tool kit. And the tool kit is
placed beneath the loadspace floor. To fit the towing hook,
remove the small cover set into the bumper, then screw
the towing hook via the small hole into the threaded hole
in the bumper beam (see illustration). Ensure the towing
hook is fully tightened!
Note: The small cover removed may be secured to the
bumper by a plastic cord.
In case your vehicle broke down or encountered an
accident, you can use the towing hook to tow your vehicle.
But they are not designed for towing other vehicles. The
car can be towed by using a soft rope, but a hard rod is
preferred.
Towing
When towing, DO NOT suddenly accelerate
or brake suddenly, this can cause accidents.
Suspended Towing
Suspended towing is the best method for a vehicle needs
to be towed. The drive wheels should be suspended above
the ground, or the transmission may be damaged. And
release the parking brake, turn on the hazard warning lamp,
with no passenger left in the vehicle.
Vehicles equipped with timely four-wheel drive system
(AWD) can only use the second or third traction mode
shown in the figure.
238
Summary of Contents for MG HS
Page 88: ......
Page 166: ...Seats Restraints normally for those about 7 years old or those older than 7 years old 152...
Page 269: ...Emergency Information Code Specs Function F53 F54 255 5...
Page 272: ......
