SAIC MOTOR MG HS Manual Download Page 36

Page: 36 / 319

Instruments and Controls

Warning Information

The followings are the warning icons that appear on the
information centre display, but not accompanied with a
warning lamp.

Icon

Action

Indicates to close all doors, bonnet

and boot.

Indicating to slow down.

Indicating to adjust the steering

wheel leftward.

Indicating to adjust the steering

wheel rightward.

Trip Computer

With the ignition switch in ON position, the trip computer
information function can be selected as follows:

Right Buttons on Steering Wheel

• Press the LEFT/RIGHT button on the right of the

steering wheel to shift the display items of the trip
computer.

Summary of Contents for MG HS
































































































































































































































































































































Search results

Summary of Contents for MG HS

Reviews:

Related manuals for MG HS

Brands by name

Popular brands

SAIC MOTOR MG HS, Manual

Search results

Summary of Contents for MG HS

Reviews:

Related manuals for MG HS

Brands by name

Popular brands