SAIC MOTOR MG HS Manual Download Page 148

Page: 148 / 319

Seats & Restraints

Airbag Supplementary Restraint
System

Overview

The airbag SRS provides ADDITIONAL
protection in a severe frontal impact only. It
does not replace the need, or requirement to
wear a seat belt.

The airbags together with the seat belts
provide optimum protection for adults, but
it is not the case for infants.

The seat

belt and airbag systems in the vehicle are
not designed for protecting infants.

The

protection required by infants should be
provided by child restraints.

The Airbag Supplementary Restraint System generally
consists of:

• Front Airbags (fitted to the centre of the steering wheel

and dashboard above the glove compartment)

• Seat Side Airbags (fitted to the outer side of the seat

squab)

• Side Head Impact Protection Airbags (fitted behind the

headlining)

134

Summary of Contents for MG HS
































































































































































































































































































































Search results

Summary of Contents for MG HS

Reviews:

Related manuals for MG HS

Brands by name

Popular brands

SAIC MOTOR MG HS, Manual

Search results

Summary of Contents for MG HS

Reviews:

Related manuals for MG HS

Brands by name

Popular brands