Technical data’s and circuit diagrams for the modular system
PCD0
26/766 E2
(HB_PCD0 26 766_E2.DOC)
SAIA-Burgess Controls Ltd.
Page 37
4.2.2
Numerical display on the BC bus coupler
Display of the active operating mode
RUN mode
RUN mode can also include
information on the TRIGGER and
LOCK modes (for details see
descriptions from page 129).
Display, TRIGGER, FORCE, LOCK
modes show the selected channel.
1. Hexadecimal number of the
expansion module
2. Input (E) or output (A)
3. Channel # (decimal)
Example 2E04: module 2, input,
channel 04
During power on the actual firmware
version is shown quickly
Display of error messages
An error message is displayed if a
fault occurs.
Example E004: Internal data transfer
between bus coupler and module
interrupted
See Error messages on the bus coupler display on page 166.
