PCD0
Technical data’s and circuit diagrams for the modular system
Page 94
ã
SAIA-Burgess Controls Ltd.
(HB_PCD0 26 766_E2.DOC)
26/766 E2
4.18.11
Specifications RIO C24-10
RIO C24-10
Order no.
PCD0.H110
Module ID
10d / 0Ah (6 I/O bytes)
11d / 0Bh (10 I/O bytes)
Number of counters
4 (16 bit) or 2 (32 bit)
Counting frequency
Max. 200 kHz
Interference suppression adjustable 200 Hz, 2 kHz, 20 kHz, 200 kHz
Number of inputs/outputs
12 inputs
4 outputs
External power supply
DC 24 V ± 20% max. 5% residual ripple
Power consumption from external 24 V power
supply
0.25 W (without input currents / load currents)
Power consumption from internal 5 V power
supply
1.1 W
Inputs
Switching level
H level +15 V to +30 V
L level -30 V to +5 V
Input current
Min. H level (+15 V), I
³
3.5 mA
Max. L level (+5 V), I
£
1.0 mA
Typical (+24 V), I = 7.5 mA
Isolation from internal bus
Yes, each channel separately via opto-electronic couplers
Simultaneity
100%
Signal delay
<1 µs (hardware)
Outputs
Output current per output max.
1A overload and short-circuit proof
Total current for whole module max.
4 A
Switching level
H level = power supply - 0.5 V
L level <= 1V
Isolation from internal bus
Yes, each channel separately via opto-electronic couplers
Simultaneity
100%
Free-wheeling diode
Integrated
Signal delay
<300 µs (hardware)
Power supply for fast encoders (terminals X2.21 / X2.22)
Voltage
DC 24 V
Current
Max. 1A
See also General specifications on page 162.
