PCD0
PROFIBUS-DP field bus
Page 174
ã
SAIA-Burgess Controls Ltd.
(HB_PCD0 26 766_E2.DOC)
26/766 E2
Examples of address configurations
Configuration of bus nodes and addresses:
The 00 base addresses have been chosen as an example only and must be adapted to
the respective PLC system.
In this example the bus coupler uses 4 bytes for diagnosis data
because the diagnosis is switched on. If the diagnosis is switched off
no address space is used.
The 8-fold expansion module (8I/O) always uses only the low byte. In
this example bytes 08 and 04 are therefore not used.
Other examples
Diagnosis is switched on in all examples.
