PCD0
Technical data’s and circuit diagrams for the modular system
Page 108
ã
SAIA-Burgess Controls Ltd.
(HB_PCD0 26 766_E2.DOC)
26/766 E2
4.20
Potential distributor RIO KE 16
The potential distributor is used to extend the terminal of the DC 24 V
and 0 V potentials. It has 2 separate terminal rows with 10 terminals
on each row. This allows an extension of the connection system to 3 -
or 4-wires.
The potential distributor can only be mounted on modules with
suitable clips. Modules with clips have a separate order no. (see
Overview).
Installation
Push the potential distributor (1) onto
the bracket (2) on the module until
the latch of the potential distributor
locks into place.
Dismantling
Open the latch (1) of the potential
distributor by pushing a screwdriver
between the distributor and the unit.
Remove the potential distributor by
pulling it in direction B.
4.20.1
Specifications Potential distributor RIO KE 16
RIO KE16
Order no.
PCD0.K300
Number of terminal rows
2 (isolated)
Number of terminals
20 (10 in each row)
Max. current load on each terminal
8 A
See also General specifications on page 162.
