saia-burgess PCD0, Operating Manual

Page: 139 / 193

Service functions on the BC bus coupler PCD0
26/766 E2
(HB_PCD0 26 766_E2.DOC)
SAIA-Burgess Controls Ltd. Page 139
9 Service functions on the BC bus coupler
The BC bus coupler allows you to carry out service functions via the
integrated keypad and the display.
9.1 Overview of service functions
Service function 1 Reserved
Service function 2 Reserved
Service function 3 Display process data width of inputs
Service function 4 Display process data width of outputs
Service function 5 Bus coupler diagnosis range ON/OFF
Service function 6 Save specified bus node configuration
Service function 7 User lock-out ON/OFF
Service function 8 User lock-out with password
Service function 9 Advanced PROFIBUS-DP diagnosis ON/OFF
Service function 10 Byte swap mode ON/OFF
Service function 11 Delete bus coupler EEPROM
Service function 12 Display/set bus address
Service function 13 Set data width of counter and positioning modules
9.2 Selecting and using a service function
Press the High/Low keys simultaneously in RUN or STOP mode.
The display shows S 00.
If error code E016 or E017 is displayed the user lock-out on the bus
coupler is active.
Use service function 7 to deactivate the user lock-out.
Use the Right key to set the required service function.
Then press the OK key.