Parameterizing and diagnosis functions for all bus couplers
PCD0
26/766 E2
(HB_PCD0 26 766_E2.DOC)
SAIA-Burgess Controls Ltd.
Page 161
10.20
Function 21 Save/delete bus node configuration
EC and BC bus couplers from software version 01xx only
The current bus node configuration can be saved as the specified
configuration. If the current configuration is changed (e.g. if a slide
contact is opened accidentally) error E012, flashing code 4, will be
displayed when you switch the bus coupler on.
Diagnose Output
Diagnose Input
Byte 3
Byte 2
Byte 1
Byte 0
Byte 3
Byte 2
Byte 1
Byte 0
EC/BC
21
21
Mod
Mod
Diagnose Output
Byte 2 MOD (mode)
><1
Delete specified configuration and do not check
anymore
1
Save current configuration as specified configuration
Default setting: 0
Diagnose Input
Byte 2 MOD (mode)
The parameters are reflected on Byte 2 of the diagnose input data.
10.21
Function 255
Reset
Reset resets all error messages as if you were deleting error
messages using the OK key on the BC bus coupler. No functions are
executed.
Diagnose Output
Diagnose Input
Byte 3
Byte 2
Byte 1
Byte 0
Byte 3
Byte 2
Byte 1
Byte 0
EC/BC
