Service functions on the BC bus coupler
PCD0
26/766 E2
(HB_PCD0 26 766_E2.DOC)
SAIA-Burgess Controls Ltd.
Page 143
9.15
Service function 13 Set data width of counter and positioning modules
For counter and positioning modules only, not for BC CANopen.
Select this service function to set the module location number for the
selected module.
Module location numbers:
Press OK to confirm the new values.
Set the required data width using the following parameters:
Parameter = 1
Data width 3 words
Parameter = 2
Data width 5 words
Default setting: Parameter 2
Turn the bus coupler off and on again. This will activate your new
settings.
