- 14 -
MF 5990 - Agoris M943
2 - Installation
In this section, you will find the initial settings to be
configured to be able to use your machine's basic
functions:
• geographic settings (country, language, communica-
tion network);
• date / time settings;
• fax settings (machine name and number);
• local network settings (automatic configuration of the
Ethernet network);
• paper settings.
To configure the
geographic
settings:
1
Press the
MENU
key.
2
Press
OTHER COMMANDS
>
SETTINGS
>
GENERAL
>
GEOGRAPHICAL
>
COUNTRY
.
3
Select the required country from the list. Use the up
and down arrows to scroll through the available
countries. Press
OK
to confirm the new setting.
Choosing the country automatically configures
the machine's default language and the telecom-
munications network.
4
In the navigation path at the top of the screen,
press
GENERAL
to return to the previous menu.
To set the machine's
date and time
:
1
In the menu
GENERAL
, press
DATE AND TIME
.
2
Press
TIME
. Enter the time using the virtual key-
board. Press
OK
to confirm the new setting.
3
Press
DATE
. Enter the date using the virtual key-
board. Press
OK
to confirm the new setting.
4
In the navigation path at the top of the screen,
press
GENERAL
to return to the previous menu.
To define the machine's
number and name
, required for
the fax function:
1
In the menu
GENERAL
, press
FAX
.
2
Press
PHONE NUMBER LINE 1
. Enter the number
using the virtual keyboard. Press
OK
to confirm the
new setting.
3
Press
LINE 1 NAME
. Enter the machine's name
using the virtual keyboard. Press
OK
to confirm the
new setting.
4
In the navigation path at the top of the screen,
press
SETTINGS
to return to the previous menu.
To run an
automatic configuration of the Ethernet
network
(automatic allocation of the IP address via the
DHCP server):
1
In the menu
SETTINGS
, press
COMMUNICATION
>
LOCAL NETWORK
>
IPV4
>
ADDRESS
ALLOCATION
.
2
Select
AUTOMATIC
from the options available in
the list. Press
OK
to confirm the new setting.
The machine will search for a DHCP or BOOTP
server on the local network that can dynamically
allocate its network settings.
This operation may take a few minutes.
3
Check that the parameters
IP ADDRESS
,
SUBNET MASK
,
GATEWAY
,
PRIMARY DNS
,
SECONDARY DNS
,
WINS 1 SERVER
and
WINS
2 SERVER
are correctly entered. If this is not the
case, you will have to configure them manually.
4
Press
MENU
to return to the home screen.
To check and/or specify the
paper type and format
for
each machine tray:
1
Press
PAPER
.
2
Press
FORMAT
. Check that the paper format de-
tected in each tray is correctly entered. To correct
a paper format, press on the corresponding tray;
select the required format from the list and press
OK
to confirm.
3
Press
TYPE
. Check that the paper type detected in
each tray is correctly entered. To correct a paper
type, press on the corresponding tray, select the re-
quired paper type from the list and press
OK
to
confirm.
4
Press
MENU
to return to the home screen.
Consult the section Configuring the machine and services
[
21] for more available parameters, and to configure the
machine according to your specific needs.
Note
This section will help you to first configure
the machine, assuming the use of a direct
telephone line on the PSTN network, and an
Ethernet configuration via a DHCP server
with automatic allocation of IP address.
Consult the section Configuring the
machine and services [
21] if you want to
configure the machine differently.
