- 12 -
MF 5990 - Agoris M943
2 - Installation
2
Remove the cover from the paper tray.
3
Press the paper compression flap to lock it.
4
Press on the longitudinal paper guide and slide it to
the required paper format.
5
Press on the longitudinal paper guide and slide it to
the required paper format.
6
Fan the transparencies in small quantities and
even them up on a flat surface to prevent paper
jams or skewed prints.
7
Load the transparencies into the paper tray with the
print surface facing up.
8
Make sure the transparencies do not exceed the fill
limit.
9
Replace the cover on the paper tray. Ensure that
the cover is properly closed.
10
Replace the paper tray in the machine and push it
in fully.
11
Define the format and type of transparencies used
in the machine.
The machine automatically detects standard paper
formats. To check / define the format and type of pa-
per loaded, consult the section Paper settings [
25].
Starting up the machine
Connecting the machine
Note
The loading capacities depend on the thick-
ness of the transparencies used. You can
load up to 100 transparencies of standard
thickness in the paper trays.
WARNING
Before connecting the power cable, you
must consult the Safety Instructions
[
121].
