Sagem 5890bdn, User Manual

Page: 106 / 176

5-18
Operation
Date en cours : 7 June 2006
C:\Documents and Settings\G092899\Bureau\LU 252 745 055A HFF 5890dn_EN\Utilisation Gb.fm
The following will be displayed:
Then, once the document has been scanned:
Lift the flatbed scanner flap, turn over your card then close the flap.
The following will be displayed:
Your fax machine will then print your card.
S
PECIFIC COPY SETTINGS
When the copy quality is no longer satisfactory, you can perform a calibration. To do so, please see the
paragraph
Scanner calibration , on page 6-12.
Moreover, a high number of controls let you improve the copy quality.
Scanner settings
841 OK - ADVANCED FCT / COPY / RESOLUTION
The B&W RESOLUTION setting to adjust the resolution for photocopying. Select the resolution:
ULTRA FAST , FAST
,
QUALITY
or
PHOTO
by means of the or , keys,
validate your choice by pressing the
OK
key.
842 OK - ADVANCED FCT / COPY / ZOOMING
The
ZOOM
setting is used to reduce or enlarge part of the document by choosing the original and
the zoom value to apply to the document, 25 to 400%. Enter the zoom value required using the
keys of the digital key pad. Validate the choice with the
OK key.
843 OK - ADVANCED FCT / COPY / ASSEMBLED
The
ASSEMBLED
parameter is used to define the choice of your printer outputs; either
assembled or not assembled. Validate the choice with the OK key.
844 OK - ADVANCED FCT / COPY / ORIGIN
If you wish, you can change the origin of the scanner.
COPY IN PROGRESS
TURN OVER DOC
THEN OK
COPY IN PROGRESS