Sagem 5890bdn, User Manual

Page: 155 / 176

Maintenance
6-25
Date en cours : 7 June 2006
C:\Documents and Settings\G092899\Bureau\LU 252 745 055A HFF 5890dn_EN\MaintenanceGb.fm
Op
eration
Setting yo
ur
machine
Getting started
Directory
Mainte
nanc
e
Safety
Contents
Installation
Storage Error Codes
Hard disk errors
Memory card errors
-
C
ODE -
M
EANING
01 Hard disk formatting error. If this error persists after the printer has
been switched off and then switched back on, format the hard disk
again.
02 The disk system is not installed. Recheck the requirements for
using the system and the devices.
04 Insufficient space on the hard disk. Delete unnecessary files, etc.
in order to free up space.
05 The specified file does not exist on the hard disk.
06 No memory available on the hard disk. Increase the memory
available.
10 Formatting is not possible because host data is being spooled on
the hard disk. Wait until the disk is ready, then format it again.
85 VMB: Alias error. The alias setting was lost, or the virtual tray
corresponding to the alias does not exist. Set the alias again.
97 The number of permanent code jobs that can be stored reached
the limit value, and no more can be saved. Either delete some
unnecessary jobs, etc., or increase the limit.
98 An unreadable page was found in a job (The job is damaged.).
99 The print job with the specified ID does not exist on the hard disk.
-
C
ODE -
M
EANING
01 The printer does not support the memory card inserted.
02 The memory card is not installed.
04 The memory card is full and cannot hold any more data. Delete
unnecessary files or use a new memory card.
05 The specified file is not on the memory card.
06 Insufficient printer memory to support the memory card. Expand
the printer memory.