Sacmi Imola CHS Series, Instruction Manual

Page: 55 / 116

062AZ005A
SAFETY EQUIPMENT AND PRECAUTIONS 3
3-7
3.3 INSTALLATION
3.3.1 GENERAL STANDARDS
E0004
WARNING!
Install the machine by following the instructions provided by the Manufacturer and observing safety standards and
regulations. Make sure there is enough space around the machine so that it can be operated and serviced easily. It
is important to take into consideration the dimensions of the machine in all the positions moving parts may reach, in
particular:
- the minimum space for whole body access to operate and perform maintenance must be 500 mm;
- the minimum distance between moving parts and fixed obstacles must meet the requirements of standard EN349;
to prevent total body crushing the minimum distance must be 500 mm.
The area surrounding the machine must always be kept free of obstacles, clean, dry and well-lit.
The customer must make sure that fire suppressors are provided in the area where the machine is installed and that
there is a system for protection against voltage fluctuation in the electricity supply line. These must conform to laws
currently in force in the country where the machine is installed.
E0007
WARNING!
It is extremely important that the machine is properly connected to an effective ground system.
E0007
WARNING!
The electrical wiring does not come with a differential protective device unless expressly requested.
E0007
WARNING!
If electronic converters are present in the electrical control cabinet, the differential protective devices installed on the
cabinet’s power supply line must ensure protection against leakage currents.
E0004
WARNING!
SACMI shall not be held responsible for any property damage or personal injury resulting from improper installation.