Sacmi Imola CHS Series, Instruction Manual

Page: 11 / 116

062AZ005A
GENERAL INFORMATION 1
1-3
1.5 WARRANTY
SACMI shall be held responsible only for the machine as it was configured at the time of delivery and to the subject
that stipulated the sales contract with SACMI, or, in the case of leased machines, to the user named by the leasing
purchaser.
Any operations that alter the configuration of the machine or work cycle must be carried out or duly authorized by
SACMI.
SACMI shall not be held responsible for damages deriving from the use of non-original spare parts or any jobs done
by the purchaser’s technicians or, in the case of leased machines, by the user named by the leasing company and/
or technicians not duly authorized by SACMI and operations not described in this manual and/or for which SACMI
supervision is required and/or which were not expressly authorized by SACMI.
The warranty is valid only if the machine has been correctly used in accordance with the instructions provided by the
manufacturer.
The warranty does not cover parts subject to wear and tear.
The warranty is void in the following cases:
- required maintenance jobs not performed;
- altering, tampering or misuse of the machine;
- if spare parts different from the ones originally installed in the machine are used;
- if changes are made.
SACMI shall not be held liable for machine damage caused by misuse or malfunctioning of other equipment connected
to the machine.
The warranty covers only machine damage and/or malfunctions with explicit exclusion of compensation for any
additional damage. In any case, the seller shall not be held responsible for loss due to lack of or reduced production,
as well as any special, indirect or consequential loss of any nature whatsoever.
As regards any annexes or modifications to the above, in any case the general terms and conditions set forth in the
contract shall be abided.
Any warranties different from that granted to the machine purchaser by SACMI in the contract, or in the case of
leased machines, the user named by the leasing company are excluded.
E0004
WARNING!
The machine operators and maintenance staff are not responsible for carrying out operations under warranty,
special maintenance and repairs. These operations are to be performed only by the manufacturer's specially
trained technicians. For this reason, these types of operations are not dealt with in this manual. The machine
purchaser or, in the case of leased machines, the user named by the leasing company should contact SACMI to
plan the work or receive the necessary instructions.
1.6 ATTACHMENTS
The documents listed below supplement this instructions manual.
- VISION SYSTEM INSTRUCTIONS,
- INSTRUCTIONS B
(this document may be split into several handbooks containing information on how to use the control system and
electric and electronic components installed in the machine).
- INSTRUCTIONS C.
- MAINTENANCE INSTRUCTIONS FOR THE ELECTRIC EQUIPMENT.
- WIRING DIAGRAMS.
- AIR CONDITIONER DOCUMENTATION (if provided).
- ADHESIVES AND LUBRICANTS DATA SHEET.