![background image](http://html1.mh-extra.com/html/ryobi/rht4550/rht4550_original-instructions-manual_1507136004.webp)
2
| English
before use.
Many accidents are caused by poorly
maintained power tools.
■
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
■
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed.
Use of the power tool for operations
different from those intended could result in a
hazardous situation.
SERVICE
■
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that safety of the power tool is maintained.
HEDGE TRIMMER SAFETY WARNINGS
■
Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed materials.
A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
■
Carry the hedge trimmer by the handle with cutter
blade stopped. When transporting or storing the
hedge trimmer always fit the cutting device cover.
Proper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
■
Hold the power tool by insulated gripping surface
only, because the cutter blade may contact hidden
wiring or its own cord.
Cutter Blades contacting a
“live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
■
Keep cable away from cutting area.
During operation
the cable may be hidden in shrubs and can be
accidentally cut by the blade.
ADDITIONAL SAFETY WARNINGS
■
Some regions have regulations that restrict the use of
the product to some operations. Check with your local
authority for advice. Read all instructions.
■
Clear the work area before each use. Remove all
objects such as cords, lights, wire, or string that can
be thrown or become entangled in the cutting means.
■
Check the hedge for foreign objects, such as wire
fences.
■
Exercise additional caution when using the product near
fencing, posts, buildings, or other immovable objects.
■
Beware of thrown objects. Keep all bystanders,
children, and pets at least 15m away from work area.
■
Do not allow children or untrained individuals to use the
product.
■
Do not operate in poor lighting. The operator requires a
clear view of the work area to identify potential hazards.
■
Ensure all handles and guards are fitted when using
the hedge trimmer. Never attempt to use an incomplete
hedge trimmer or one fitted with an unauthorised
modification.
■
Ensure before each use that all controls and safety
devices function correctly. Do not use the product if the
off switch does not stop the motor.
■
Inspect the product before each use. Check for loose
fasteners. Make sure all guards and handles are
properly and securely attached. Replace any damaged
parts before use.
■
Do not modify the product in any way.
■
Wear full eye and hearing protection while operating the
product. If working in an area where there is a risk of
falling objects, head protection must be worn.
■
Wear heavy long trousers, boots, and gloves. Do not
wear loose clothing, short trousers, jewellery of any
kind, or use with bare feet.
■
Secure long hair so it is above shoulder level to prevent
entanglement in moving parts.
■
Use of hearing protection reduces the ability to hear
warnings (shouts or alarms). The operator must pay
extra attention to what is going on in the working area.
■
Operating similar tools nearby increases both the risk
of hearing injury and the potential for other persons to
enter your working area.
■
Do not use the product when you are tired, ill, or under
the influence of alcohol, drugs, or medication.
■
Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance and can
result in serious injury.
■
Keep all parts of your body away from any moving part.
■
Before starting the product, make sure the cutting
blades will not come in contact with anything.
■
While operating the hedge trimmer, always hold it firmly
with both hands by the two handles. Ensure that the
operating position is safe and secure. The manufacturer
does not recommend the use of steps or ladders. If
higher trimming is required, use an extended-reach
tool.
■
Blades are sharp. When handling the blade assembly,
wear non-slip, heavy-duty, protective gloves. Do not
place your hand or fingers between the blades or in any
position where they could get pinched or cut.
■
Always stop the product, disconnect from the power
supply, make sure all moving parts have come to stop,
and allow the product to cool down before:
●
adjusting the working position of the cutting device
●
cleaning or clearing a blockage
●
leaving the product unattended
●
checking, maintaining, or working on the product
■
Do not force the hedge trimmer through heavy
shrubbery. This can cause the blades to bind and slow
down. If the blades slow down, reduce the pace.
■
Do not attempt to cut stems or twigs that are larger than
20 mm thick for RHT4550, 22 mm thick for RHT5150, or
those obviously too large to feed into the cutting blade.
Use a non-powered hand saw or pruning saw to trim
large stems.
■
Do not operate the product with damaged or excessively
worn blades.
Summary of Contents for RHT4550
