RTW 10689, Operating Manual

Page: 172 / 186

RTW DigitalMonitor 8ch 10689 172
Fig. E 7-13: Fastening the table stand (10689-PLUS)
14. Completion and function check
10689 only:
• Connect the DigitalMonitor 8ch to signal sources and DC-supply. Check
its functions. The units are now ready for operation.
10689-PLUS only:
• Place centered the table stand to the rear flange of the bottom side
of the case and fasten it with its screw. (Fig. E 7-13, also see Chapter
E 7.2.)
• Connect the DigitalMonitor 8ch to signal sources and DC-supply. Check
its functions. The units are now ready for operation.
E 7 Service • E 7.2 Display exchange