RTW 10689, Operating Manual

Page: 157 / 186

RTW DigitalMonitor 8ch 10689 157
E 6 Installation
E 6.1 Safety information
Before installing and configuring the DigitalMonitor 8ch 10689, please study
the following safety information carefully and observe all the recommen-
dations to avoid injury and prevent damage to this product or any products
connected to it.
To prevent possible electrical shock, fire, injuries and malfunctions, use this
product only as specified.
• Only qualified personnel should perform service procedures.
• Do not open the housing.
• Do not insert your fingers or any other objects into the housing.
• Do not cover the unit and do not place any objects or anything containing
liquids on it.
• Use only the supplied power cord and the certified power supply speci-
fied for this product and certified for the country of use.
• Connect and disconnect properly and use only connectors specified for
this product and fix them tight before use.
• To avoid fire or shock hazard, observe all ratings and markings on the
product. Consult the operating manual for further rating information before
making connections to this product.
• Do not apply a potential to any terminal that exceeds the maximum rating
of that terminal.
• The power cord of the external power supply disconnects the product
from the power source. Do not block the power cord or power supply; it
must remain accessible to the user at all times.
• Do not operate this product with cover plates or panels removed.
• Use only fuse type and rating specified for this product.
• Avoid exposed circuitry. Do not touch exposed connections and compo-
nents when power is present.
• Do not operate with suspected failures. If you suspect there is damage
to this product, have it inspected by qualified service personnel.
• Do not operate in wet/damp conditions.
• Do not operate in explosive atmosphere.
• Do not operate in dusty environments.
• Do not operate the unit without adequate ventilation.
• Turn off and disconnect the power supply immediately it the unit produces
unusual smells, noises or smoke, or if foreign substances (e. g. liquids)
or foreign objects enter the unit.
• Keep product surfaces clean and dry.
There are no user-serviceable parts in the DigitalMonitor 8ch 10689. Please
always have any necessary servicing performed by a properly qualified tech-
nician. Never remove any parts from the unit and do not make any modifica-
tions to the unit without the express written consent of RTW. Modifications
can cause both safety hazards and affect the unit’s EMI-CE conformity.
The DigitalMonitor 8ch 10689 is designed for indoor use and may only be
operated with a power supply unit provided for it (see the Optional Acces-
sories in Chapter E 1.6.2).
E 6 Installation • E 6.1 Safety information