RTW 10689, Operating Manual

Page: 132 / 186

RTW DigitalMonitor 8ch 10689 132
E 4.3.1 Changing Correlator Parameters
It is possible to customize some of the display elements shown in the Multi
Correlator.
To access the respective menu from normal display operation please
proceed as following:
1. Press and hold the currently marked MODE/SET button until the unit
changes to main menu mode.
2. Use Up or Dwn key to set the red cursor on the Modify Preset option and
enter this selection by pressing the Sel (SELECT) key.
3. Use Up or Dwn key to highlight the Primary Function option for Multi
Instrument 1. Press the Sel (SELECT) key repeatedly until MultiCorrelator
is shown.
4. Use Up or Dwn key to highlight the more .. option (one line below). Press
the Sel (SELECT) key to enter the Multi-Correlator menu page.
5. Make the appropriate changes.
Note:
For details about the available parameters please refer to the accor-
ding topics in Chapter E 5.2.4.2: more .. for Primary Function:
MultiCorrelator (Multi-Correlator menu).
Fig. E 4-6: Multi Correlator menu display with Multi Correlator parameters
E 4 Display Modes • E 4.3 Multi Correlator Display
See Chapter E 5.2.4.2