RTW 10689, Operating Manual

Page: 118 / 186

RTW DigitalMonitor 8ch 10689 118
See Fig. E 3-2 In the main menu (see Fig. E 3-2) you will see the following four options
which can be accessed using the Up / Dwn (Down) keys and entered with
the Sel (SELECT) key:
• Use Preset
Use the Use Preset option to load a factory or user preset for the MODE/
SET button that was used to enter the menu. Press the Sel (SELECT) key
repeatedly to select the preset of your choice.
Note:
The Use Preset option only selects the preset for the MODE/SET but-
ton previously chosen, not for the other one. In case you want to define
the preset for the other mode please leave the menu with
Quit and press
the other MODE/SET button. After this you can access the menu again
by pressing the same MODE/SET button for more than 1 second and
select the preset for this mode.
• Modify Preset (submenu)
Selecting Modify Preset enters a submenu with detailed configuration
options for all three display sections (PPM section and Multi Instrument 1,
Multi Instrument 2). The configuration changes made here can be saved
in one of the user presets U1 - U8 (see Chapter E 3.5) before leaving the
menu.
• Remote (submenu)
Selecting the Remote option enters a submenu for activation of the remote
interface to control the button functions.
• General (submenu)
Selecting the General option enters a submenu with several global system
options.
See Chapter E 3.5
E 3 Quick Start • E 3.3 Menu Access