RTW 10689, Operating Manual

Page: 126 / 186

RTW DigitalMonitor 8ch 10689 126
E 4.1.1 Changing PPM parameters
Many parameters of the PPM bargraphs, the peak hold function and the
loudness indicators can be changed in the Peak Program Meter section of
the
Modify Preset menu.
To access this menu from normal display operation please proceed
as following:
1. Press and hold the currently marked MODE/SET button until the unit
changes to main menu mode.
2. Use Up or Dwn key to set the red cursor on the Modify Preset option and
enter this selection by pressing the Sel (SELECT) key.
3. Use Up or Dwn key to highlight one of the first two selections:
• PPM Mode lets you change the channel configuration for the bargraphs
by pressing the Sel (SELECT) key repeatedly when highlighted.
• more .. opens a submenu by pressing the Sel (SELECT) key once when
highlighted. The submenu offers several options to change Color-Set-
ups, routings, measuring standards, scales and ballistics of the PPM
bargraphs (among many others).
4. Make the appropriate changes.
Note:
For details about the available parameters please refer to the accor-
ding topics in Chapter E 5.2.2: Peak Program Meter / more .. selection
(PPM Digital menu).
Fig. E 4-2: PPM Digital menu display with PPM parameters
E 4 Display Modes • E 4.1 PPM Display
See Chapter E 5.2.2