RTW 10689, Operating Manual

Page: 131 / 186

RTW DigitalMonitor 8ch 10689 131
E 4.3 Multi Correlator Display
The Multi Correlator is a display mode available in the four Stereo modes
showing the phase relationship of the channel pairs (L1:R1, L2:R2, L3:R3
and L4:R4). The Multi Correlator is not available in the 2-channel, 4-channel,
6-channel and 8-channel modes. The upper phase meter here corresponds
to the bargraphs of the stereo channel pair placed on the left side in the
PPM section.
The Multi Correlator display will show up in the Multi Instrument 1 after
pressing a MODE/SET button repeatedly - provided that it was activated in
the Toggle Selection of this Mode before.
Note:
Please refer to Chapter E 3.8 to learn about how to activate or deactivate
certain display modes in the Toggle Selection menu (for menu description
see Chapter E 5.2.5).
Fig. E 4-5: The Multi Corellator display in Multi Instrument 1 section
See Chapter E 3.8 and
E 5.2.5
The Multi Correlator instru-
ment is
only available in the
Stereo modes!
E 4 Display Modes • E 4.3 Multi Correlator Display
Stereo channel pair L1:R1
Stereo channel pair L4:R4
Stereo channel pair L3:R3
Stereo channel pair L2:R2