RTW 10689, Operating Manual

Page: 160 / 186

RTW DigitalMonitor 8ch 10689 160
0 V Pin 3
0 V Pin 4
Pin 2 +24 V DC ±10 %
Pin 1 +24 V DC I
nom.
= 290 mA
E 6.3.3 Connecting VGA: VGA Monitor connection
15-pin Sub-D-F connector
Pin: Function:
1 R | Video signal
2 G |
3 B |
4 not used
5 - 8 GND
9
not used
10 GND
11 not used
12 not used
13 H-sync
14 V-sync
15 not used
E 6.3.4 Connecting 24 V DC: Power Supply
The DigitalMonitor 8ch re24 V DC power (±10 %, 290 mA nominal
current). We recommend the use of the RTW 1171-R or 1175-R. These wide
voltage power supplies have been designed for use with the DigitalMonitor
8ch and provide the necessary locking 4-pin low voltage connector type
Binder 710.
One of these power supplies is part of the 10689-PLUS delivery.
The pins labelled “not
used” in the table
must
remain unconnected!
P i n 1
P i n 2
P i n 3
P i n 4
P i n 5
P i n 6
P i n 7
P i n 8
P i n 9
P i n 1 0
P i n 1 1
P i n 1 2
P i n 1 3
P i n 1 4
P i n 1 5
(
External view of the connector
)
E 6 Installation • E 6.3 Connection
Note:
Please note that the momentary switch-on current is considerably higher
than the nominal current!