RTW 10689, Operating Manual

Page: 171 / 186

RTW DigitalMonitor 8ch 10689 171
Fig. E 7-12: Mounting the backplane cover
(3)
(1)
(2)
A
B
C
11. Bend the connector of the outstanding connecting flat cable with its
contacts to the connector on the main pcb (A) and place it exactly between
the two guiding pins of the connector (B). Fasten it with slight pressure
(C). Take care not to press or damage the flat cable. (Fig. E 7-11)
12. Check wiring and connections again.
13. Place the backplane cover back to the upper flange of the connector
panel (A) and fold it into the tracks of the case (B). Fasten it with the four
screws (C). (Fig. E 7-12)
Fig. E 7-11: Fastening the connecting flat cable to the main pcb
E 7 Service • E 7.2 Display exchange