RTW 10689, Operating Manual

Page: 151 / 186

RTW DigitalMonitor 8ch 10689 151
See Chapter E 5.2.3
E 5.2.5 Multi Instrument 1: Toggle Selection
In normal display operation, repeatedly pressing the same MODE/SET button
cycles the Multi Instrument 1 through all display modes defined in this menu.
Each display mode can be switched on or off. The toggle selection is saved
as part of each preset.
Use Up or Dwn key to access all available display modes for Multi Instru-
ment 1 . On each selection use the Sel key to switch this display mode On
or Off. All modes switched to On will be available for the Toggle function.
Vectorscope Off
Multi-Correlator Off (must be ON, pri. instr.)
Status Off
Note:
The display modes available in this menu depend on the selected PPM
mode (see table in E 5.2.3 for details). The current selected instrument
for Primary Function is marked with (must be ON, pri. instr).
Fig. E 5-8: The Toggle Selection submenu for Multi Instrument 1
on Modify Preset menu (Fig. E 5-2):

( Up ), Dwn to Multi Instrument 1
and Toggle Selection,

Sel to open according submenu
E 5 Menu • E 5.2 Modify Preset