RTW 10689, Operating Manual

Page: 144 / 186

RTW DigitalMonitor 8ch 10689 144
E 5.2.2.1 Routing, Label, Color
After pressing Sel on the Routing,Label,Color option of the PPM-Digital
menu, the following submenu is displayed:
This menu features several options to route the six digital input channels of
the DigitalMonitor 8ch 10689 to the individual bargraphs, to switch bargraphs
on or off, to label bargraphs and to configure individual colors for each
display element of the PPM instrument.
Routing Matrix
Use the matrix to route each physical input channel to one or more internal
instrument channel(s)/bargraph(s). Each line of the matrix represents one of
the input channels 1a, , 4b. Use the
Up or Dwn key to highlight one of the
input channels and press the Rgt key to move the cursor to the right until it
marks the desired bargraph position on which the input signal of this chan-
nel should be displayed. You can press the
Sel key repeatedly to select a
different label for this bargraph. All labels defined in the Label option below
are accessible in this way.
It is possible to route one input channel to more than one bargraph - but of
course it is not possible to route more than one input channel to the same
bargraph.
After changing a predefined routing configuration the matrix turns red to
show that an individual routing was set up.
Fig. E 5-4: The Routing, Label, Color submenu in 4 x Stereo mode
on Modify Preset menu (Fig. E 5-2):

( Up ), Dwn to more ..,

Sel to open PPM-Digital menu

( Up ), Dwn to Routing, Label, Color

Sel to open the menu
E 5 Menu • E 5.2 Modify Preset