RTW 10689, Operating Manual

Page: 121 / 186

RTW DigitalMonitor 8ch 10689 121
E 3.5 Saving and Renaming Presets
If you have changed the configuration of the DigitalMonitor 8ch 10689 with
the Modify Preset option in the main menu and you want to use these changes
in normal display operation, you will have to store the modified setup to a
user preset of your choice (U1 - U8) before leaving the menu and going
back to the normal display modes.
Fig. E 3-3: The Save Preset screen of the DigitalMonitor 8ch 10689
Example:
DigitalMonitor
8ch
10689
See Fig. E 3-3
See Fig. E 3-3
See Fig. E 3-3
After leaving the main menu or one of the submenus with the Quit key you
will always see the Save Preset screen (see Fig. E 3-3) which prompts you
to store the actual configuration to one of the user presets. However there is
one exception to this rule: If you entered the main menu page to only select
a new preset without accessing one of the submenus you can use
Quit key
to return to normal display operation without seeing the save screen.
On the Save Preset screen (see Fig. E 3-3) you have two choices: Using
the Quit key you can return to normal display operation without saving and
therefore discarding any changes. Or you save the changes into one of the
user presets with the Press SEL to SAVE function.
Assuming you have already entered the Save Preset screen (see Fig. E 3-3)
proceed as following if you like to store the modifications:
1. Use Up or Dwn key to set the red menu focus on the Store to selection.
E 3 Quick Start • E 3.5 Saving and Renaming Presets